View UP025SL120J-B-BZ_3766880.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

notice_e-01 notice for taiyo yuden products y please read this notice before using the taiyo yuden products. reminders product infor mation in this catalog is as of october 2009. all of the contents speci?ed herein are subject to change without notice due to technical improvements, etc. therefore, please check for the latest information carefully be - fo r e practical application or usage of the products. p lease note that taiyo yuden co., ltd. shall not be responsible for any defects in products or equipment incorpo - r a ting such products, which are caused under the conditions other than those speci?ed in this catalog or individual s p eci?cation. please contact taiyo yuden co., ltd. for further details of product speci?cations as the individual speci?cation is a v ailable. please conduct validation and veri?cation of products in actual condition of mounting and operating environment b e fore commercial shipment of the equipment. all electronic components or functional modules listed in this catalog are developed, designed and intended for u s e in general electronics equipment.(for av, office automation, household, office supply, information service, t e lecommunications, ( such as mobile phone or pc) etc.). before incorporating the components or devices into any equipment in the ?eld such as transportation,( automotive control, train control, ship control), transportation signal, d i saster prevention, medical, public information network (telephone exchange, base station) etc. which may have d i rect in?uence to harm or injure a human body, please contact taiyo yuden co., ltd. for more detail in advance. d o not incorporate the products into any equipment in ?elds such as aerospace, aviation, nuclear control, subma - r i ne system, military, etc. where higher safety and reliability are especially required. i n addition, even electronic components or functional modules that are used for the general electronic equipment, i f the equipment or the electric circuit require high safety or reliability function or performances, a suf?cient reliabil - i t y evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to i n stall a protective circuit is strongly recommended at customer's design stage. the contents of this catalog are applicable to the products which are purchased from our sales of?ces or distribu - t o rs (so called ? t a iyo yuden ? s of?cial sales channel ? ). it is only applicable to the products purchased from any of taiyo yuden ? s o f ?cial sales channel. please note that taiyo yuden co., ltd. shall have no responsibility for any controversies or disputes that may oc - c u r in connection with a third party's intellectual property rights and other related rights arising from your usage of p r oducts in this catalog. taiyo yuden co., ltd. grants no license for such rights. caution for export c ertain items in this catalog may require speci?c procedures for export according to ? f o reign exchange and for - eign trade control law ? o f japan, ? u.s. export administration regulations ? , and other applicable regulations. should you have any question or inquiry on this matter, please contact our sales staff. s hould you have any question or inquiry on this matter, please contact our sales staff.
36 leaded_c01_e-01 features ordering code external dimensions/minimum quantity available capacitance range applications wv 50v up 35v gp 2 5v tp 1 6v e p 10v lp temp.char. b f b f b f b f f type cap. 02 5 050 075 025 050 050 075 075 075 025 025 050 025 050 050 pf pf 3digits 100 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 3900 392 4700 472 5600 562 6800 682 8200 822 10000 103 12000 123 15000 153 18000 183 22000 223 27000 273 33000 333 39000 393 47000 473 56000 563 68000 683 82000 823 100000 104 220000 224 470000 474 1000000 105 2200000 225 4700000 475 10000000 106 wv 50v up temp.char. ch sl type cap. 02 5 050 025 pf pf 3digits 1 010 1.2 1r2 1.5 1r5 1.8 1r8 2.2 2r2 2.7 2r7 3.3 3r3 3.9 3r9 4.7 4r7 5.6 5r6 6.8 6r8 8.2 8r2 10 100 11 110 12 120 13 130 15 150 16 160 18 180 20 200 22 220 24 240 27 270 30 300 33 330 36 360 39 390 43 430 47 470 51 510 56 560 62 620 68 680 100 101 150 151 220 221 330 331 470 471 680 681 1000 102 this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. ? this widely used ceramic capacitor provides a wide capacitance range of 1pf through 10 f in o ne standard size and shape. ? automatic insertion related costs are lower than with radial type capacitors. ? mounting pitch can be between 5mm to 26mm which could be used as a j umper. ? th e class 1 temperature compensating (npo) products can be used i n c ircuits to stabilize frequency and temperature characteristics. t he b, and f dielectrics are optimum for bypass capacitors. axial leaded ceramic capacitors ? rated voltage vdc l 10 e 16 t 25 g 35 u 50 ? internal code , z multilayer type standard products j multilayer type low voltage products =blank space ? packaging b ammo c bulk ? lead con?guration mm a 26mm lead space, ammo pack b 52mm lead space, ammo pack kf 5.0mm pitch formed lead bulk ke 7.5mm pitch formed lead bulk na axial lead, bulk ? outside dimensions l d m m 0 75 4.2 3.2 multilayer type 050 3.2 2.2 multilayer type 025 2.3 2.0 multilayer type ? nominal capacitance pf example 010 1 1r2 1.2 103 10000 r=decimal point ? type p axial leaded capacitors u p 0 2 5 b 1 0 4 k a b ? ? ? ? ? ? ? ? ? ? capacitance tolerances d 0.5pf j 5% k 10% m 20% z 80 20 ? temperature haracteristics ch 0 60 ppm/ sl 350 1000 ppm/ b 10 f % =blank space 30 85 type dimensions taped product bu lk product l d d st raight straight formed multilayer type 075 4 . 2max. 0.165max. 3.2max. 0.126max. 0.55 0.05 0.022 0.002 pitch:7.5mm 0.295 multilayer type 050 3.2max. 0.126max. 2.2max. 0.87max. 0.45 0.05 0.018 0.002 multilayer type 025 2.3max. 0.09max. 2.0max. 0.079max. unit : mm i nch class 1 t emperatur e compensating multilayer type class 2 high dielectric constant capacitance c h aracteristics measured at 20 temperature char. capacitance change capacitance to lerance q or tan cl ass ch 0 60ppm/ d 0 .5pf k 1 0% j 5 % e ng ? refer to the part munber 1 sl 350 1000ppm/ b 10% k 1 0% , m 20% 2 f 30 85 % z 80 20 % wave minimum quantity [pcs] bulk taping a 2000 075 3000 050 5000 025 b na 1000 ke 075 3000 kf 050 3000 kf 025 4000
capacitors 37 leaded_c01_e-01 part numbers this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. multilayer 025 type class 1 rated voltage dc ordering code e h s (environmental hazardous substances) temperature characteristics capacitance pf capacitance tolerance q or tan insulation resistance 50v u p 025 010d z rohs ch sl 1.0 0.5pf qR400+20c 10000mmin. up025 1r2d z rohs 1.2 up025 1r5d z rohs 1.5 up025 1r8d z rohs 1.8 up025 2r2d z rohs 2.2 up025 2r7d z rohs 2.7 up025 3r3d z rohs 3.3 up025 3r9d z rohs 3.9 up025 4r7d z rohs 4.7 up025 5r6k z rohs 5.6 10% up025 6r8k z rohs 6.8 up025 8r2k z rohs 8.2 up025 100j z rohs 10 5% up025 120j z rohs 12 up025 150j z rohs 15 up025 180j z rohs 18 up025 220j z rohs 22 up025 270j z rohs 27 up025 330j z rohs 33 qR1000 up025 390j z rohs 39 up025 470j z rohs 47 up025 560j z rohs 56 up025 680j z rohs 68 up025 820j z rohs 82 up025ch101j z rohs ch 100 up025ch151j z rohs 150 up025ch221j z rohs 220 up025ch331j z rohs 330 up025ch471j z rohs 470 up025ch681j z rohs 680 up025ch102j z rohs 1000 please specify the temperature characteristics code and lead con?guration code. multilayer 025 type class 2 rated voltage dc ordering code e h s (environmental hazardous substances) temperature characteristics capacitance pf capacitance tolerance q or tan insulation resistance 5 0 v up025 b101k z rohs b 100 10% tan?Q3.5% 5000mmin. up025 b121k z rohs 120 up025 b151k z rohs 150 up025 b181k z rohs 180 up025 b221k z rohs 220 up025 b271k z rohs 270 up025 b331k z rohs 330 up025 b391k z rohs 390 up025 b471k z rohs 470 up025 b561k z rohs 560 up025 b681k z rohs 680 up025 b821k z rohs 820 up025 b102k z rohs 1000 up025 b122k z rohs 1200 up025 b152k z rohs 1500 up025 b222k z rohs 2200 up025 b332k z rohs 3300 up025 b472k z rohs 4700 up025 b682k z rohs 6800 up025 b103k z rohs 10000 up025 b153k z rohs 15000 up025 b223k z rohs 22000 up025 b333k z rohs 33000 up025 b473k z rohs 47000 tan?Q5.0% 1000mmin. up025 b683k z rohs 68000 up025 b104k z rohs 100000 16v ep025 b224k z rohs 220000 500mmin. ep025 b474k z rohs 470000 200mmin. ep025 b105k z rohs 100000 tan?Q7.5% 100mmin. 50v up025 f103z z rohs f 10000 80 `20 tan?Q7.5% 1000mmin. up025 f223z z rohs 22000 up025 f473z z rohs 47000 up025 f104z z rohs 100000 16v ep025 f224z z rohs 220000 tan?Q10.0% 500mmin. ep025 f474z z rohs 470000 ep025 f105z z rohs 100000 tan?Q17.5% 250mmin. to next page
38 leaded_c01_e-01 part numbers this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. rated voltage dc ordering code eh s (environmental hazardous substances) temperature characteristics capacitance pf capacitance tolerance q or tan insulation resistance 5 0 v up050ch220j z rohs ch 22 5% q R 4 0 0 20c 10000m min. up050ch240j z rohs 24 up050ch270j z rohs 27 up050ch300j z rohs 30 q R 1000 up050ch330j z rohs 33 up050ch360j z rohs 36 up050ch390j z rohs 39 up050ch430j z rohs 43 up050ch470j z rohs 47 up050ch510j z rohs 51 up050ch560j z rohs 56 up050ch620j z rohs 62 up050ch680j z rohs 68 up050ch750j z rohs 75 up050ch820j z rohs 82 up050ch910j z rohs 91 up050ch101j z rohs 100 up050ch111j z rohs 110 up050ch121j z rohs 120 up050ch131j z rohs 130 up050ch151j z rohs 150 up050ch161j z rohs 160 up050ch181j z rohs 180 up050ch201j z rohs 200 up050ch221j z rohs 220 up050ch241j z rohs 240 up050ch271j z rohs 270 up050ch301j z rohs 300 up050ch331j z rohs 330 up050ch361j z rohs 360 up050ch391j z rohs 390 up050ch431j z rohs 430 up050ch471j z rohs 470 up050ch511j z rohs 510 up050ch561j z rohs 560 up050ch621j z rohs 620 up050ch681j z rohs 680 up050ch751j z rohs 750 up050ch821j z rohs 820 up050ch911j z rohs 910 up050ch102j z rohs 1000 please specify the temperature characteristics code and lead con?guration code. : o ption multilayer type class 1 rated voltage dc ordering code e h s (environmental hazardous substances) temperature characteristics capacitance pf capacitance tolerance q or tan insulation resistance 1 6 v ep025 b122m j rohs b 1200 20 tan?Q3.5% 5000mmin. ep025 b152m j rohs 1500 ep025 b182m j rohs 1800 ep025 b222m j rohs 2200 ep025 b272m j rohs 2700 ep025 b332m j rohs 3300 ep025 b392m j rohs 3900 ep025 b472m j rohs 4700 ep025 b562m j rohs 5600 ep025 b682m j rohs 6800 ep025 b822m j rohs 8200 ep025 b103m j rohs 10000 ep025 b123m j rohs 12000 ep025 b153m j rohs 15000 ep025 b183m j rohs 18000 ep025 b223m j rohs 22000 25v tp025 f103z j rohs f 10000 80 `20 tan?Q7.5% 1000mmin. tp025 f223z j rohs 22000 tp025 f473z j rohs 47000 please specify the temperature characteristics code and lead con?guration code.
capacitors 39 leaded_c01_e-01 part numbers this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. multilayer type class 2 rated voltage dc ordering code e h s (environmental hazardous substances) temperature characteristics capacitance pf capacitance tolerance q or tan insulation resistance 5 0 v u p 0 5 0 b 1 2 2 k z rohs b 1200 10% tan?Q3.5% 5000mmin. u p 0 5 0 b 1 5 2 k z rohs 1 500 u p 0 5 0 b 1 8 2 k z rohs 1 800 u p 0 5 0 b 2 2 2 k z rohs 2 200 u p 0 5 0 b 2 7 2 k z rohs 2 700 u p 0 5 0 b 3 3 2 k z rohs 3 300 u p 0 5 0 b 3 9 2 k z rohs 3 900 u p 0 5 0 b 4 7 2 k z rohs 4 700 u p 0 5 0 b 5 6 2 k z rohs 5 600 u p 0 5 0 b 6 8 2 k z rohs 6 800 u p 0 5 0 b 8 2 2 k z rohs 8 200 u p 0 5 0 b 1 0 3 k z rohs 1 0000 u p 0 5 0 b 1 2 3 k z rohs 1 2000 u p 0 5 0 b 1 5 3 k z rohs 1 5000 u p 0 5 0 b 1 8 3 k z rohs 1 8000 u p 0 5 0 b 2 2 3 k z rohs 2 2000 u p 0 5 0 b 2 7 3 k z rohs 2 7000 u p 0 5 0 b 3 3 3 k z rohs 3 3000 u p 0 5 0 b 3 9 3 k z rohs 3 9000 u p 0 5 0 b 4 7 3 k z rohs 4 7000 tan?Q5.0% 1000mmin. u p 0 5 0 b 5 6 3 k z rohs 56000 u p 0 5 0 b 6 8 3 k z rohs 6 8000 u p 0 5 0 b 8 2 3 k z rohs 8 2000 u p 0 5 0 b 1 0 4 k z rohs 1 00000 u p 0 5 0 b 2 2 4 k z rohs 2 20000 500mmin. u p 0 5 0 b 4 7 4 k z rohs 4 70000 200mmin. 35v g p 0 5 0 b 1 0 5 k z rohs 1000000 100m min. 16v e p 0 5 0 b 2 2 5 k z rohs 2 200000 tan?Q7.5% 50mmin. e p 0 5 0 b 4 7 5 k z rohs 4 700000 tan?Q12.5% 20mmin. e p 0 5 0 b 1 0 6 k z rohs 1 0000000 50v u p 0 5 0 f 1 0 3 z z rohs f 1 0000 80 ` 20 tan?Q7.5% 1000mmin. u p 0 5 0 f 2 2 3 z z rohs 2 2000 u p 0 5 0 f 4 7 3 z z rohs 4 7000 u p 0 5 0 f 1 0 4 z z rohs 1 00000 u p 0 5 0 f 2 2 4 z z rohs 220000 tan ?Q10.0% 500mmin. u p 0 5 0 f 4 7 4 z z rohs 470000 u p 0 5 0 f 1 0 5 z z rohs 1000000 tan ?Q15% 250mmin. 16v e p 0 5 0 f 2 2 5 z z rohs 2 200000 125mmin. 10v l p 0 5 0 f 4 7 5 z z rohs 4 700000 tan?Q17.5% 50mmin. l p 0 5 0 f 1 0 6 z z rohs 1 0000000 25mmin. 50v u p 0 7 5 b 1 0 5 k rohs b 1 000000 10% tan?Q5.0% 100mmin. 35v g p 0 7 5 b 2 2 5 k rohs 2 200000 tan?Q7.5% 50mmin. g p 0 7 5 b 4 7 5 k rohs 4 700000 20mmin. 25v t p 0 7 5 b 1 0 6 k rohs 1 0000000 tan?Q12.5% 35v g p 0 7 5 f 1 0 6 z rohs f 1 0000000 80 ` 20 tan?Q17.5% 25mmin. please specify the temperature characteristics code and lead con?guration code. : o ption
40 leaded_c01_e-01 electrical characteristics this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. -6 -7 sl -2 00 20 40 60 80 up050 f104z -10 -5 0 5 10 -2 00 20 40 60 80 up050b103k up050b104k capacitance -vs- temperature characteristics
leaded_c_reli-prp1 leaded_c_reli_e-01 packaging this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. minimum quantity dimensions of b ulk products ? na con?guration type lead con?guration code minimum quantity p cs bulk taping multilayer t y pe 075, 050, 025 a 1.024 inch wide 2000 075 3 000 0 50 5 000 0 25 b 2.047 inches wide n a 1 000 ke 0 75 3000 kf 0 50 3000 kf 0 25 4000 type dimensions mm d l d ? multilayer type 025 2 . 0max 0.079 2.3max 0.09 0.45 0.05 0.018 0.002 20.0min. 0.787 m u ltilayer type 050 2 . 2max 0.087 3.2max 0.126 0.45 0.05 0.018 0.002 20.0min. 0.787 m u ltilayer type 075 3 . 2max 0.126 4.2max 0.165 0.55 0.05 0.022 0.002 20.0min. 0.787 u n it mm i n ch ? kf/ke con?guration type `?? dimensions mm d l w d ? multilayer t y pe 025 k f 2 .0max 2.3max 5.0 0.5 0.45 0.05 6.5 0.5 0.079max 0.09max 0.197 0.020 0.018 0.002 0.256 0.020 multilayer type 050 k f 2 .2max 3.2max 5.0 0.5 0.45 0.05 6.5 0.5 0.087max 0.126max 0.197 0.020 0.018 0.002 0.256 0.020 multilayer type 075 k e 3 .2max 4.2max 7.5 0.5 0.55 0.05 6.5 0.5 0.126max 0.165max 0.295 0.020 0.022 0.002 0.256 0.020 unit mm inch taping dimensions ? a a 1.024 inch wide con?guration ? b a2.047 inches wide con?guration type dimensions mm minimum insertion p i tch d l a b l 1 l 2 d multilayer type 025 2.0max 2.3max 52 2 1 2.047 0.079 0.039 1.2max. 0.047max. 1.0max 0.039max. 0.45 0.05 5.0 0.197 0.079max 0.09max 0.018 0.002 multilayer type 050 2.2max 3.2max 0.45 0.05 0.087max 0.126max 0.018 0.002 multilayer type 075 3.2max 4.2max 0.55 0.05 7.5 0.295 0.126max 0.165max 0.022 0.002 radial taping is available for 075 type (optional) unit mm in ch type dimensions mm minimum insertion p i tch d l a b l 1 l 2 d multilayer type 025 2.0max 2.3max 26 0.5 0 1.024 0.020 0 0.8max. 0.031max. 0.5max 0.020max. 0.45 0.05 5.0 0.197 0.079max 0.09max 0.018 0.002 multilayer type 050 2.2max 3.2max 0.45 0.05 0.087max 0.126max 0.018 0.002 multilayer type 075 3.2max 4.2max 0.55 0.05 7.5 0.295 0.126max 0.165max 0.022 0.002 unit mm inch
leaded_c_reli-prp2 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 1. operating temperature range speci?ed value t emperatur e compensating class1 multilayer type 25 to 85 high permittivity class2 multilayer type characteristics b multilayer type characteristics f 2. storage t emperature range speci?ed v a lue t emperatur e compensating class1 multilayer type 25 to 85 high permittivity class2 multilayer type characteristics b multilayer type characteristics f 3. rated v oltage speci?ed v a lue t emperatur e compensating class1 multilayer type 50vdc high permittivity class2 multilayer type characteristics b 16vdc 25vdc35vdc50vdc multilayer type characteristics f 10vdc 16vdc25vdc35vdc50vdc 4. withstanding voltage between terminals speci?ed v alue no abnorminality t est methods and remarks applied voltage rated v oltage 3 class 1 rated v oltage 2.5 class 2 duration 1 to 5 sec. char ge/dischar ge current 50ma max. class 1,2 between terminals and body speci?ed value no abnorminality t est methods and remarks metal globule method applied voltage rated v oltage 2.5, duration 1 to 5 sec., char ge/discharge current 50ma max. insulation resistance speci?ed v a lue t emperatur e compensating class1 multilayer type 10000 min. high permittivity class2 multilayer type characteristics b rated ivoltage 16vdc 1200pf 22000pf item 5000m min 220000pf 500m min 470000pf 200m min 1000000pf 100m min 4700000pf 20m min 2200000pf 50m min 10000000pf 20m min 10000000pf 20m min rated ivoltage 25vdc 10000000pf 20m min rated ivoltage 35vdc 1000000pf 100m min 2200000pf 50m min 4700000pf 20m min rated ivoltage 50vdc 100pf 39000pf 5000m min 47000pf 100000pf 1000m min 220000pf 500m min 470000pf 200m min 1000000pf 100m min multilayer type characteristics f rated ivoltage 10vdc 4700000pf 50m min 10000000pf 25m min rated ivoltage 16vdc 220000pf 500m min 470000pf 500m min 1000000pf 250m min 2200000pf 125m min rated voltage 25vdc 10000pf 47000pf item j 1000m min rated voltage 35vdc 10000000pf 25m min rated voltage 50vdc 10000pf 100000pf 000m min 220000pf 470000pf 500m min 1000000pf 250m min t est methods and remarks applied voltage rated voltage, duration 60 5 sec. 6 capacitance speci?ed v alue t emperatur e compensating class1 multilayer type 0.5pf 5% 10% high permittivity class2 multilayer type characteristics b 10% 20% item j multilayer type characteristics f 80 ` 20 % t est methods and remarks measuring fr equency 1mhz 10 class 1 c Q 1000pf measuring voltage 1.0 0.5vrms class 1 c Q 1000pf bias application none 1khz 10 class 1 c 1000pf 1.0 0.2vrms class 1 c 1000pf 1khz 10 class 2 c Q 10 f 1.0 0.2vrms class 2 c Q 10 f 120hz 10 class 2 c 10 f 0.5 0.1vrms class 2 c 10 f withstanding voltage is also referred to as "voltage proof" under iec speci?cations. axial leaded ceramic capacitors
leaded_c_reli-prp3 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. q or tangent of loss angle tan ? speci?ed value t emperatur e compensating class1 multilayer type 30pf or under q R 400 20c 33pf or over q R 1000 c nominal capacitance pf high permittivity class2 multilayer type characteristics b rated ivoltage 16vdc 1200pf 22000pf itemj 3.5% max 100000pf 5.0% max 220000pf 470000pf 5.0% max 1000000pf 2200000pf 7.5% max 4 7 00000pf 10000000pf 12.5% max rated ivoltage 2 5vdc 10000000pf 12.5% max rated ivoltage 35vdc 1000000pf 5.0% max 2200000pf 4700000pf 7.5% max rated ivoltage 50vdc 100pf 39000pf 3.5% max 47000pf 1000000pf 5.0% max multilayer type characteristics f rated ivoltage 10vdc 4700000pf 10000000pf 17.5% max rated ivoltage 16vdc 220000pf 10.0% max 470000pf 10.0% max 1000000pf 17.5% max 2200000pf 15.0% max rated ivoltage 25vdc 10000pf 47000pf item j 7.5% max rated ivoltage 35vdc 10000000pf 17.5% max rated ivoltage 50vdc 10000pf 100000pf 7.5% max 220000pf 470000pf 10.0% max 1000000pf 15.0% max t est methods and remarks measuring fr equency 1mhz 10 class 1 c Q 1000pf measuring voltage 1.0 0.5vrms class 1 c Q 1000pf bias application none 1khz 10 class 1 c 1000pf 1.0 0.2vrms class 1 c 1000pf 1khz 10 class 2 c Q 10 f 1.0 0.2vrms class 2 c Q 10 f 120hz 10 class 2 c 10 f 0.5 0.1vrms class 2 c 10 f capacitance change due to t emperatur e or rate of capacitance change when voltage is not applied speci?ed value t emperatur e compensating class1 multilayer type ch 0 60 sl ` 350 1000 [ppm/ ] high permittivity class2 multilayer type characteristics b 10% multilayer type characteristics f 30 ` 85 % test methods and remarks measur ement of capacitance at 20 and 85 , 25 shall be made to calculate temperature characteristic by the following equation. class 1 c 85 c 20 10 6 ppm/ c 20 t change of maximum capacitance deviation in step 1 to 5 class 2 t emperature at step 1 20 temperature at step 4 85 temperature at step 2 25 temperature at step 5 20 temperature at step 3 20 reference temperature 9 terminal strength t ensile speci?ed v a lue t emperatur e compensating class1 multilayer type no abnomalities, such as cuts or looseness of terminals. high permittivity class2 multilayer type characteristics b multilayer type characteristics f test methods and remarks apply the stated tensile for ce pr ogr essively in the direction to draw terminal. nominal wire diameter mm tensile force n duratio s 0.45 19.6 5 torsional speci?ed va lue t emperatur e compensating class1 multilayer type no abnomalities, such as cuts or looseness of terminals. high permittivity class2 multilayer type characteristics b multilayer type characteristics f t est methods and remarks suspend a mass at the end the terminal, incline the body thr ough angle of 90? and r etur n it to initial position. this operation is done over a period of 5 sec. then second bend in the opposite direction shall be made. number of bends 2 times nominal wire diameter mm bending force n mass weight kg 0.45 2.45 0.25 withstanding voltage is also referred to as "voltage proof" under iec speci?cations. axial leaded ceramic capacitors
leaded_c_reli-prp4 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 10 resistance to vibration speci?ed value t emperatur e compensating class1 multilayer type appearance no signi?cant abnomality withstanding v oltage no abnomality capacitance 4.7pf or under w ithin 0.5pf 5.6pf 8.2pf within 10% 10pf or over within 5% q 30pf or under q R 400+20c 33pf or over q R 1000 insulation r esistance 10000m min. c nominal capacitance [pf] h i gh permittivity class2 multilayer type characteristics b appearance : no signi?cant abnomality withstanding voltage : no abnomality rated voltage 16vdc capacitance within 10% 1200pf 22000pf item j within 20% 220000pf~10000000pf within 10% tan 1200pf 2 2000pf item j 3.5% max 220000pf 470000pf 5.0% max 1000000pf 2200000pf 7.5% max 4700000pf 10000000pf 12.5% max insulation resistance 1200pf 2 2000pf item j 5000m min 220000pf 500m min 470000pf 200m min 1000000pf 100m min 2200000pf 50m min 4700000pf 10000000pf 20m min rated v oltage 25vdc capacitance within 10% tan 10000000pf 1 2.5% max insulation resistance 10000000pf 2 0m min rated v oltage 35vdc capacitance within 10% tan 1000000pf 5 .0% max 2200000pf 4700000pf 7.5% max insulation resistance 1000000pf 1 00m min 2200000pf 50m min 4700000pf 20m min rated v oltage 50vdc capacitance within 10% tan 100pf 3 9000pf 3.5% max 47000pf 1000000pf 5.0% max insulation resistance 100pf 39000pf 5000m min 47000pf 100000pf 1000m min 220000pf 500m min 470000pf 200m min 1000000pf 100m min multilayer type characteristics f appearance : no signi?cant abnomality withstanding v o ltage : no abnomality rated v oltage 10vdc capacitance within 80 ` 20 % tan 4700000pf 1 0000000pf 17.5% max insulation resistance 4700000pf 5 0m min 10000000pf 25m min rated v oltage 16vdc capacitance within 80 ` 20 % tan 220000pf 1 0.0% max 470000pf 10.0% max 1000000pf 17.5% max 2200000pf 15.0% max insulation resistance 220000pf 500m min 470000pf 500m min 1000000pf 250m min 2200000pf 125m min withstanding voltage is also referred to as "voltage proof" under iec speci?cations. axial leaded ceramic capacitors to next page
leaded_c_reli-prp5 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 10 resistance to vibration speci?ed value h i gh permittivity class2 multilayer type characteristics f rated v oltage 25vdc capacitance within 80 ` 20 % tan 10000pf 4 7000pf item j 7.5% max insulation resistance 10000pf 4 7000pf item j 1000m min rated voltage 35vdc capacitance within 80 ` 20 % tan 10000000pf 1 7.5% max insulation resistance 10000000pf 2 5m min rated v oltage 50vdc capacitance within 80 ` 20 % tan 10000pf 1 00000p 7.5% max 220000pf 470000pf 10.0% max 1000000pf 15.0% max insulation resistance 10000pf 1 00000p 1000m min 220000pf 470000pf 500m min 1000000pf 250m min t est methods and remarks accor ding to jis c 5102 clause 8.2 vibration type a dir ections 2 hrs each in x, y and z dir ections t otal 6 hrs fr equency range 10 to 55 to 10hz 1min amplitude 1.5 mm mounting method soldering onto the pc boar d 11 free fall speci?ed value t emperatur e compensating class1 multilayer type appearance no signi?cant abnomality withstanding v oltage no abnomality capacitance 4.7pf or under within 0.5pf 5.6pf 8.2pf within 10% 10pf or over within 5% q 30pf or under q R 400+20c 33pf or over q R 1000 insulation r esistance 10000m min. c nominal capacitance[pf] h i gh permittivity class2 multilayer type characteristics b appearance no signi?cant abnomality withstanding v oltage no abnomality rated v oltage 16vdc capacitance 1200pf 2 2000pf item j within 20% 220000pf 10000000pf within 10% tan 1200pf 22000pf item j 3.5% max 220000pf 470000pf 5.0% max 1000000pf 2200000pf 7.5% max 4700000pf 10000000pf 12.5% max insulation r esistance 1200pf 22000pf item j 5000m min 220000pf 500m min 470000pf 200m min 1000000pf 100m min 2200000pf 50m min 4700000pf 10000000pf 20m min rated v oltage 25vdc capacitance within 10% tan ? 10000000pf 1 2.5% max insulation resistance 10000000pf 20m min rated v oltage 35vdc capacitance within 10% tan 1000000pf 5 .0% max 2200000pf 4700000pf 7.5% max insulation r esistance 1000000pf 100m min 2200000pf 50m min 4700000pf 20m min rated v oltage 50vdc capacitance within 10% tan ? 100pf 3 9000pf 3.5% max 47000pf 1000000pf 5.0% max insulation r esistance 100pf 39000pf 5000m min 47000pf 100000pf 1000m min 220000pf 500m min 470000pf 200m min 1000000pf 100m min withstanding voltage is also referred to as "voltage proof" under iec speci?cations. axial leaded ceramic capacitors to next page
leaded_c_reli-prp6 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 11 free fall speci?ed value h i gh permittivity class2 multilayer type characteristics f appearance no signi?cant abnomality withstanding v oltage no abnomality rated v oltage 10vdc capacitance within 80 ` 20 % tan 4700000pf 1 0000000pf 17.5% max insulation r esistance 4700000pf 50m min 10000000pf 25m min rated v oltage 16vdc capacitance within 80 ` 20 % tan 220000pf 1 0.0% max 470000pf 10.0% max 1000000pf 17.5% max 2200000pf 15.0% max insulation r esistance 220000pf 500m min 470000pf 500m min 1000000pf 250m min 2200000pf 125m min rated v oltage 25vdc capacitance within 80 ` 20 % tan 10000pf 4 7000pf item j 7.5% max insulation resistance 10000pf 47000pf item j 1000m min rated voltage 35vdc capacitance within 80 ` 20 % tan 10000000pf 1 7.5% max insulation r esistance 10000000pf 25m min rated v oltage 50vdc capacitance within 80 ` 20 % tan 10000pf 1 00000pf 7.5% max 220000pf 470000pf 10.0% max 1000000pf 15.0% max insulation r esistance 10000pf 100000pf 1000m min 220000pf 470000pf 500m min 1000000pf 250m min t est methods and remarks dr op t est fr ee fall impact material floor height 1 m t otal number of dr ops 5 times 12 body strength speci?ed v a lue t emperatur e compensating class1 multilayer type no abnomality such as damage. high permittivity class2 multilayer type characteristics b multilayer type characteristics f t est methods and remarks applied for ce 19.6n duration 5 sec. speed shall attain to speci?ed for ce in 2 sec. 1.5mm 025type 13 solderability speci?ed value t emperatur e compensating class1 multilayer type at least 75% of lead surface is covered with new solder. high permittivity class2 multilayer type characteristics b multilayer type characteristics f t est methods and remarks solder temperatur e 230 5 duration 2 0.5 sec. this test may be applicable after 6 months storage. withstanding voltage is also referred to as "voltage proof" under iec speci?cations. axial leaded ceramic capacitors
leaded_c_reli-prp7 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 14 soldering speci?ed value t emperatur e compensating class1 multilayer type appearance no signi?cant abnomality withstanding v oltage no abnomality capacitance change 8.2pf or under within 0.25pf 10pf or over within 2.5% q 30pf or under q R 400+20c 33pf or over q R 1000 insulation r esistance 10000m min. c nominal capacitance[pf] h i gh permittivity class2 multilayer type characteristics b appearance no signi?cant abnomality withstanding voltage no abnomality rated v oltage 16vdc capacitance change 1200pf 2 2000pf item j within 7.5% 220000pf 10000000pf within 10.0% tan 1200pf 22000pf item j 3.5% max 220000pf 470000pf 5.0% max 1000000pf 2200000pf 7.5% max 4700000pf 10000000pf 12.5% max insulation r esistance 1200pf 22000pf item j 5000m min 220000pf 500m min 470000pf 200m min 1000000pf 100m min 2200000pf 50m min 4700000pf 10000000pf 20m min rated v oltage 25vdc capacitance change 10000000pf within 1 0.0% tan 10000000pf 12.5% max insulation r esistance 10000000pf 20m min rated v oltage 35vdc capacitance change 1000000pf 4 700000pf within 10.0% tan 1000000pf 5.0% max 2200000pf 4700000pf 7.5% max insulation r esistance 1000000pf 100m min 2200000pf 50m min 4700000pf 20m min rated v oltage 50vdc capacitance change 100pf 3 9000pf within 7.5% 47000pf 1000000pf within 10.0% tan ? 100pf 39000pf 3.5% max 47000pf 1000000pf 5.0% max insulation r esistance 100pf 39000pf 5000m min 47000pf 100000pf 1000m min 220000pf 500m min 470000pf 200m min 1000000pf 100m min multilayer type characteristics f appearance no signi?cant abnomality withstanding v oltage no abnomality rated v oltage 10vdc capacitance change within 20% tan 4700000pf 10000000pf 17.5% max insulation r esistance 4700000pf 50m min 10000000pf 25m min rated v oltage 16vdc capacitance change within 20% tan ? 220000pf 470000pf 10.0% max 1000000pf 17.5% max 2200000pf 15.0% max insulation r esistance 220000pf 470000pf 500m min 1000000pf 250m min 2200000pf 125m min rated v oltage 25vdc capacitance change within 20% tan 10000pf 4 7000pf item j 7.5% max insulation resistance 10000pf 47000pf item j 1000m min withstanding voltage is also referred to as "voltage proof" under iec speci?cations. thermal shock is also referred to as "rapid change of temperature" under iec speci?cations. axial leaded ceramic capacitors to next page
leaded_c_reli-prp8 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 14 soldering speci?ed value h i gh permittivity class2 multilayer type characteristics f rated v oltage 35vdc capacitance change within 20% tan 10000000pf 1 7.5% max insulation r esistance 10000000pf 25m min rated v oltage 50vdc capacitance change 10000pf 1 000000pf within 20.0% tan 10000pf 1 00000pf 7.5% max 220000pf 470000pf 10.0% max 1000000pf 15.0% max insulation r esistance 10000pf 100000pf 1000m min 220000pf 470000pf 500m min 1000000pf 250m min t est methods and remarks solder temperatur e 270 5 duration 5 0.5 sec. immersed conditions inserted into the pc boar d with t=1.6mm, hole=1.0mm diameter preconditioning 1 hr of pr econditioning at 150 0 10 followed by 48 4 hrs of recovery under the standard condition. recovery recovery for the following period under the standard condition after the test. 24 2 hrs class 1 48 4 hrs class 2 15 resistance to solvent speci?ed value t emperatur e compensating class1 multilayer type no signi?cant abnormality in appearance and legible marking. h igh permittivity class2 multilayer type characteristics b multilayer type characteristics f t est methods and remarks accor ding to jis c 5102 clause 8.7.4. t ype of test method 1 solvent temperatur e 20 to 25 duration 30 5 sec. solvent t ype a in t able 23, isopr opyl alcohol 16 thermal shock speci?ed value t e mperatur e compensating class1 multilayer type appearance no signi?cant abnomality withstanding v oltage no abnomality capacitance change 8.2pf or under within 0.5pf 10pf or over within 5.0% q 8.2pf or under q R 200+10c 10pf 30pf q R 275+2.5c 33pf or over q R 350 insulation r esistance 1000m or over c nominal capacitance[pf] h i gh permittivity class2 multilayer type characteristics b appearance no signi?cant abnomality withstanding v o ltage no abnomality rated v oltage 16vdc capacitance change 1200pf 2 2000pf item j within 12.5% 220000pf 10000000pf within 15.0% tan ? 1200pf 2 2000pf item j 5.0% max 220000pf 470000pf 7.5% max 1000000pf 2200000pf 10.0% max 4700000pf 10000000pf 22.5% max insulation resistance 1200pf 22000pf item j 1000m min 220000pf 125m min 470000pf 50m min 1000000pf 25m min 2200000pf 12.5m min 4700000pf 10000000pf 5m min rated voltage 25vdc capacitance change 10000000pf within 15.0% tan 10000000pf 1 5.0% max insulation r esistance 10000000pf 5m min rated v oltage 35vdc capacitance change 1000000pf w ithin 15.0% 2200000pf 4700000pf within 15.0% tan ? 1000000pf 7 .5% max 2200000pf 4700000pf 10.0% max insulation resistance 1000000pf 25m min 2200000pf 25m min 4700000pf 5m min withstanding voltage is also referred to as "voltage proof" under iec speci?cations. thermal shock is also referred to as "rapid change of temperature" under iec speci?cations. axial leaded ceramic capacitors to next page
leaded_c_reli-prp9 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 16 thermal shock speci?ed value h i gh permittivity class2 multilayer type characteristics b rated v oltage 50vdc capacitance change 100pf 3 9000pf within 12.5% 47000pf 1000000pf within 15.0% tan ? 100pf 39000pf 5.0% max 47000pf 1000000pf 7.5% max insulation resistance 100pf 39000pf 1000m min 47000pf 100000pf 500m min 220000pf 250m min 470000pf 100m min 1000000pf 50m min multilayer type characteristics f appearance no signi?cant abnomality withstanding voltage no abnomality rated v oltage 10vdc capacitance change within 30.0% tan 4700000pf 10000000pf 20.0% max insulation r esistance 4700000pf 10m min 10000000pf 5m min rated v oltage 16vdc capacitance change within 30.0% tan 220000pf 470000pf 15.0% max 1000000pf 22.5% max 2200000pf 17.5% max insulation r esistance 220000pf 100m min 470000pf 50m min 1000000pf 25m min 2200000pf 25m min rated v oltage 25vdc capacitance change within 30% tan 10000pf 4 7000pf item j 12.5% max insulation resistance 10000pf 47000pf item j 500m min rated voltage 35vdc capacitance change within 30.0% tan 10000000pf 2 0.0% max insulation r esistance 10000000pf 5m min rated v oltage 50vdc capacitance change 10000pf 1 000000pf within 30.0% tan ? 10000pf 100000pf 12.5% max 220000pf 470000pf 15.0% max 1000000pf 17.5% max insulation r esistance 10000pf 100000pf 500m min 220000pf 470000pf 250m min 1000000pf 50m min t est methods and remarks conditions for 1 cycle step temperature ? duration min. 1 room temperature within 3 2 25 0 3 30 3 3 room temperature within 3 4 85 3 0 30 3 5 room temperature within 3 number of cycles 5 preconditioning 1 hr of pr econditioning at 150 0 10 followed by 48 4 hrs of recovery under the standard condition. recovery recovery for the following period under the standard condition after the removal from test chamber. 24 2 hrs class 1 48 4 hrs class 2 withstanding voltage is also referred to as "voltage proof" under iec speci?cations. thermal shock is also referred to as "rapid change of temperature" under iec speci?cations. axial leaded ceramic capacitors
leaded_c_reli-prp10 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 17 damp heat steady state speci?ed value t emperatur e compensating class1 multilayer type appearance no signi?cant abnomality withstanding v oltage no abnomality capacitance change 8.2pf or under w ithin 0.5pf 10pf or over within 5.0% q 8.2pf or under q R 200 10c 10pf 30pf q R 275 2.5c 33pf or over q R 350 insulation r esistance 1000m min c nominal capacitance pf h i gh permittivity class2 multilayer type characteristics b appearance no signi?cant abnomality withstanding v oltage no abnomality rated v oltage 16vdc capacitance change 1200pf 2 2000pf item j within 12.5% 220000pf 10000000pf within 15.0% tan ? 1200pf 22000pf item j 5.0% max 220000pf 470000pf 7.5% max 1000000pf 2200000pf 10.0% max 4700000pf 10000000pf 22.5% max insulation resistance 1200pf 22000pf item j 1000m min 220000pf 125m min 470000pf 50m min 1000000pf 25m min 2200000pf 12.5m min 4700000pf 10000000pf 5m min rated voltage 25vdc capacitance change 10000000pf w ithin 15.0% tan ? 10000000pf 1 5.0% max insulation r esistance 10000000pf 5m min rated v oltage 35vdc capacitance change 1000000pf w ithin 15.0% 2200000pf 4700000pf within 15.0% tan ? 1000000pf 10.0% max 2200000pf 4700000pf 10.0% max insulation resistance 1000000pf 25m min 2200000pf 25m min 4700000pf 5m min rated v oltage 50vdc capacitance change 100pf 3 9000pf within 12.5% 47000pf 1000000pf within 15.0% tan ? 100pf 39000pf 5.0% max 47000pf 1000000pf 7.5% max insulation resistance 100pf 39000pf 1000m min 47000pf 100000pf 500m min 220000pf 250m min 470000pf 100m min 1000000pf 50m min multilayer type characteristics f appearance no signi?cant abnomality withstanding voltage no abnomality rated v oltage:10vdc capacitance change within 30.0% tan : 4700000pf~10000000pf 20.0% max insulation r esistance: 4700000pf 10m min 10000000pf 5m min rated v oltage:16vdc capacitance change within 30.0% tan : 220000pf 470000pf 15.0% max 1000000pf 22.5% max 2200000pf 17.5% max insulation r esistance: 220000pf 100m min 470000pf 50m min 1000000pf 25m min 2200000pf 25m min withstanding voltage is also referred to as "voltage proof" under iec speci?cations. axial leaded ceramic capacitors to next page
leaded_c_reli-prp11 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 18 loading under damp heat speci?ed value t emperatur e compensating class1 multilayer type appearance no signi?cant abnomality withstanding v oltage no abnomality capacitance change 8.2pf or under w ithin 0.75pf 10pf or over within 7.5% q 30pf or under q R 100 10/3*c 33pf or over q R 200 insulation r esistance 500m min c nominal capacitance pf h i gh permittivity class2 multilayer type characteristics b appearance no signi?cant abnomality withstanding v oltage no abnomality rated v oltage 16vdc capacitance change 1200pf 2 2000pf item j within 12.5% 220000pf 470000pf within 15.0% 1000000pf 10000000pf within 22.5% tan 1200pf 2 2000pf item j 5.0% max 220000pf 470000pf 7.5% max 1000000pf 2200000pf 10.0% max 4700000pf 10000000pf 22.5% max insulation r esistance 1200pf 22000pf item j 500m min 220000pf 50m min 470000pf 25m min 1000000pf 12.5m min 2200000pf 5.0m min 4700000pf 10000000pf 2.5m min rated v oltage 25vdc capacitance change 10000000pf w ithin 22.5% tan 10000000pf 2 2.5% max insulation r esistance 10000000pf 2.5m min rated v oltage 35vdc capacitance change 1000000pf w ithin 15.0% 2200000pf within 15.0% 4700000pf within 22.5% tan 1000000pf 1 0.0% max 2200000pf 4700000pf 10.0% max insulation r esistance 1000000pf 12.5m min 2200000pf 5.0m min 4700000pf 2.5m min rated v oltage 50vdc capacitance change 100pf 3 9000pf within 12.5% 47000pf 1000000p within 15.0% tan ? 100pf 3 9000pf 5.0% max 47000pf 1000000pf 7.5% max insulation r esistance 100pf 39000pf 500m min 47000pf 100000pf 250m min 220000pf 125m min 470000pf 25m min 1000000pf 12.5m min 17 damp heat steady state speci?ed value h i gh permittivity class2 multilayer type characteristics f rated v oltage:25vdc capacitance change within 30% tan : 10000pf 47000pf item j :12.5% max insulation resistance: 10000pf 47000pf item j 500m min rated voltage 35vdc capacitance change within 30.0% tan : 10000000pf 2 0.0% max insulation r esistance: 10000000pf 5m min rated v oltage:50vdc capacitance change: 10000pf 1 000000pf within 30.0% tan : 10000pf 1 00000pf 12.5% max 220000pf 470000pf 15.0% max 1000000pf 17.5% max insulation r esistance: 10000pf 100000pf 500m min 220000pf 470000pf 250m min 1000000pf 50m min t est methods and remarks t emperatur e 40 2 humidity 90 to 95 % rh duration 500hrs 24 0 hrs preconditioning 1 hr of pr econditioning at 150 0 10 followed by 48 4 hrs of recovery under the standard condition. recovery 24 2 hrs of r ecovery under the standar d condition after the removal from test chamber. class 1 1 hr of preconditioning at 150 10 0 followed by 48 4 hrs of recovery under the standard condition after the removal from chamber. class 2 withstanding voltage is also referred to as "voltage proof" under iec speci?cations. axial leaded ceramic capacitors to next page
leaded_c_reli-prp12 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 18 loading under damp heat speci?ed value h i gh permittivity class2 multilayer type characteristics f appearance no signi?cant abnomality withstanding v oltage no abnomality rated v oltage 10vdc capacitance change within 30.0% tan 4700000pf 1 0000000pf 20.0% max insulation resistance 4700000pf 5m min 10000000pf 2.5m min rated v oltage 16vdc capacitance change within 30.0% tan 220000pf 4 70000pf 15.0% max 1000000pf 22.5% max 2200000pf 17.5% max insulation r esistance 220000pf 50m min 470000pf 25m min 1000000pf 12.5m min 2200000pf 12.5m min rated v oltage 25vdc capacitance change within 30.0% tan 10000pf 4 7000pf item j 12.5% max insulation resistance 10000pf 47000pf item j 250m min rated voltage 35vdc capacitance change within 30.0% tan 10000000pf 2 0.0% max insulation r esistance 10000000pf 2.5m min rated v oltage 50vdc capacitance change 10000pf 1 000000pf within 30.0% tan 10000pf 1 00000pf 12.5% max 220000pf 470000pf 15.0% max 1000000pf 17.5% max insulation r esistance 10000pf 100000pf 250m min 220000pf 470000pf 125m min 1000000pf 25m min t est methods and remarks t emperatur e 40 2 humidity 90 to 95 % rh duration 500 24 0 hrs applied voltage rated voltage pr econditioning 1 hr of pr econditioning at 150 0 10 followed by 48 4 hrs of recovery under the standard condition. recovery 24 2 hrs of r ecovery under the standar d condition after the removal from test cham-ber. class 1 1 hr of pr econditioning at 150 10 0 followed by 48 4 hrs of recovery under the standard condition after the removal from chamber. class 2 19 high temperature lading test speci?ed value t emperatur e compensating class1 multilayer type appearance no signi?cant abnomality wi thstanding vo ltage no abnomality ca pacitance ch ange 8.2pf or under wi thin 0.3pf 10pf or over wi thin 3.0% q 8.2pf or u nder q R 200+10c 10pf 30pf q R 2 75+2.5c 33pf or o ver q R 350 insulation resistance 10 00m min c nominal ca pacitance[pf] high permittivity class2 multilayer type characteristics b appearance no signi?cant abnomality withstanding v oltage no abnomality rated v oltage 16vdc capacitance change 1200pf 2 2000pf item j within 12.5% 220000pf 470000pf within 15.0% 1000000pf 10000000pf within 22.5% tan ? 1200pf 2 2000pf item j 5.0% max 220000pf 470000pf 7.5% max 1000000pf 2200000pf 10.0% max 4700000pf 10000000pf 22.5% max insulation r esistance 1200pf 22000pf item j 1000m min 220000pf 125m min 470000pf 50m min 1000000pf 25m min 2200000pf 12.5m min 4700000pf 10000000pf : 5.0m min withstanding voltage is also referred to as "voltage proof" under iec speci?cations. axial leaded ceramic capacitors to next page
leaded_c_reli-prp13 leaded_c_reli_e-01 reliabilitydata this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 19 high temperature lading test speci?ed value h i gh permittivity class2 multilayer type characteristics b rated v oltage 25vdc capacitance change 10000000pf within 22.5% tan ? 10000000pf 2 2.5% max insulation r esistance 10000000pf 5m min rated v oltage 35vdc capacitance change 1000000pf within 15.0% 2200000pf within 15.0% 4700000pf within 22.5% tan ? 1000000pf 1 0.0% max 2200000pf 4700000pf 10.0% max insulation r esistance 1000000pf 25m min 2200000pf 25m min 4700000pf 5m min rated v oltage 50vdc capacitance change 100pf 3 9000pf within 12.5% 47000pf~1000000pf within 15.0% tan ? 100pf 3 9000pf 5.0% max 47000pf 1000000pf 7.5% max insulation r esistance 100pf 39000pf 1000m min 47000pf 100000pf 500m min 220000pf 250m min 470000pf 100m min 1000000pf 50m min multilayer type characteristics f appearance no signi?cant abnomality withstanding v oltage no abnomality rated v oltage 10vdc capacitance change within 30.0% tan ? 4700000pf 1 0000000pf 20.0% max insulation r esistance 4700000pf 10m min 10000000pf 5m min rated v oltage 16vdc capacitance change 30% tan 220000pf 4 70000pf 15.0% max 1000000pf 22.5% max 2200000pf 17.5% max insulation r esistance 220000pf 100m min 470000pf 50m min 1000000pf 25m min 2200000pf 25m min rated v oltage 25vdc capacitance change within 30% tan ? 10000pf 4 7000pf item j 10.0% max insulation resistance 10000pf 47000pf item j 500m min rated voltage 35vdc capacitance change within 30.0% tan ? 10000000pf 2 0.0% max insulation r esistance 10000000pf 5m min rated v oltage 50vdc capacitance change 10000pf 1 000000pf within 30.0% tan ? 10000pf 1 00000pf 10.0% max 220000pf 470000pf 12.5% max 1000000pf 17.5% max insulation r esistance 10000pf 100000pf 500m min 220000pf 470000pf 250m min 1000000pf 50m min t est methods and remarks t emperatur e 85 3 0 duration 1000 48 0 hrs applied voltage rated voltage 2 rated voltage 1.5 class 2 b 1000000pf 025t ype b 220000pf 10000000pf 050t ype, 075type preconditioning 1 hr of pr econditioning at 150 10 0 followed by 48 4 hrs of recovery under the standard condition. recovery 24 2hrs of r ecovery under the standar d condition after the removal from test chamber. class1 1 hr of preconditioning at 150 10 0 followed by 48 4 hrs of recovery under the standard condition after the removal from chamber. class 2 note on standard condition "standard condition" referred to herein is de?ned as follows 5 to 35 of temperature, 45 to 85% relative humidity, and 86 to 106kpa of air pressure. when there are questions concerning measurement results in order to provide correlation data, the test shall be conducted under condition of 20 2 o f temperature, 60 to 70% relative humidity, and 86 to 106kpa of air pressure.unless otherwise speci?ed, all the tests are conducted under the "standard condition." withstanding voltage is also referred to as "voltage proof" under iec speci?cations. axial leaded ceramic capacitors
leaded_c_reli-prp14 leaded_c_reli_e-01 precautions this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 1. circuit design precautions veri?cation of o perating environment, electrical rating and performance 1. a malfunction in medical equipment, spacecraft, nuclear reactors, etc. may cause serious harm to human life or have severe social rami?cations. as such, a n y capacitors to be used in such equipment may require higher safety and/or reliability considerations and should be clearly differentiated from components u s ed in general purpose applications. v e ri?cation o f r ated voltage dc rated voltage 1. the operating voltage for capacitors must always be lower than their rated values. i f an ac voltage is loaded on a dc voltage, the sum of the two peak voltages should be lower than the rated value of the capacitor chosen. for a circuit where b o th an ac and a pulse voltage may be present, the sum of their peak voltages should also be lower than the capacitor's rated voltage. s e lf-generated h e at (veri?cation of temperature) 1. if the capacitors speci?ed only for dc use are used in ac or pulse circuits, the ac or a pulse current can generate heat inside the capacitor so the self- g e nerated temperature rise should be limited to within 20 . the surface temperature measured should include this self-temperature rise. therefore, it is required to limit capacitor surface temperature including self -generated heat should not exceed the maximum operating temperature of +85 . o p erating e n vironment precautions 1. capacitors should not be used in the following environments: 1 e nvironmental c o nditions to avoid a. exposure to water or salt water. b . e xposure to moisture or condensation. c . e xposure to corrosive gases (such as hydrogen sul?de, sulfurous acid, chlorine, and ammonia) t e chnical c o nsider - ations 1-1. when an ac or a pulse voltage is applied to capacitors speci?ed for dc use, even if the voltage is less than the rated voltage, the ac current or pulse current r u nning through the capacitor will cause the capacitor to self-generate heat because of the loss characteristics. t he amount of heat generated depends on the dielectric materials used, capacitance, applied voltage, frequency, voltage waveform, etc. the surface t e mperature c h anges due to emitted heat which differs by capacitor shape or mounting method. please c ontact taiyo yuden with any questions regarding emitted heat levels in your particular application. it is recommended the temperature rise be measured in the actual circuit to be used. 1 - 2. for capacitors, the voltage and frequency relationship is generally determined by peak voltage at low frequencies, and by self-generated heat at high f r equencies. ( r efer to the following curve.) 2. pcb design precautions design of the capacitor mount 1. w hen capacitors are mounted onto a pc board, hole dimensions on the board should match the lead pitch of the component, if not it will cause breakage of the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs. as a result, humidity resistance performance would be lost and may lead to a r eduction in insulation r esistance and cause a withstand voltage failur e. 3. considerations for automatic insertion pr ecautions adjustment automatic insertion machines leaded components 1. when inserting capacitors in a pc board by auto-insertion machines the impact load imposed on the capacitors should be minimized to prevent the leads from chucking or clinching. t echnical consider - ations w hen installing pr oducts, care should be taken not to apply distortion stress as it may deform the products. our company r ecommends the method to place the lead with fewer loads that join the product. 4. soldering precautions selection of flux 1. when soldering capacitors are on the board, ?ux should be applied thinly and evenly. 2. f lux used should be with less than or equal to 0.1 wt% (equivalent to chroline) of halogenated content. flux having a strong acidity content should not be applied. 3. w hen using water-soluble ?ux, special care should be taken to properly clean the boards. w ave soldering 1. t emperature, time, amount of solder, etc. are speci?ed in accordance with the following recommended conditions. 2. do not immerse the entir e capacitor in the ?ux during the soldering operation. only solder the lead wires on the bottom of the board. recommended conditions for using a soldering ir on: 1. put the soldering ir on on the land-pattern. soldering ir on's temperature - below 350 duration - 3 seconds or less numbers of times - 1 times the soldering ir on should not directly touch the capacitor. t echnical consider - ations selection of flux 1. flux is used to increase solderability in wave soldering, but if too much is applied, a large amount of flux gas may be emitted and may detrimentally affect solderability . t o minimize the amount of ?ux applied, it is r ecommended to use a ?ux-bubbling system. 2. with too much halogenated substance (chlorine, etc.) content is used to activate the ?ux, an excessive amount of residue after soldering may lead to corrosion of the terminal electr odes or degradation of insulation r esistance on the surface of the capacitors. 3. since the residue of water-soluble ?ux is easily dissolved by water content in the air, the residue on the surface of capacitors in high humidity conditions may cause a degradation of insulation resistance and therefore affect the reliability of the components. the cleaning methods and the capability of the machines used should also be considered car efully when selecting water -soluble ?ux. wave soldering 1. if capacitors are used beyond the range of the recommended conditions, heat stresses may cause cracks inside the capacitors, and consequently degrade the r eliability of the capacitors. 2. when the capacitors are dipped in solder, some soldered parts of the capacitor may melt due to solder heat and cause short-circuits or cracking of the ceramic material. deterioration of the r esin coating may lower insulation r esistance and cause a r eduction of withstand voltage. recommended conditions for using a soldering iron: 1.if products ar e used beyond the range of the recommended conditions,heat stress may deform the products,and consequently degrade the reliability of the products.
leaded_c_reli-prp15 leaded_c_reli_e-01 precautions ? this catalog contains the typical speci?cation only due to the limitation of space. when you consider purchase of our products, please check our speci?cation. for details of each product (characteristics graph, reliability information, precautions for use, and so on), see our web site (http://www.ty-top.com/) or cd catalogs. 5. cleaning precautions board cleaning 1. w hen cleaning the mounted pc boards, make sure that cleaning conditions are consistent with prescribed usage conditions. t e chnical consider - ations 1. t he resin material used for the outer coating of capacitors is occasionally a wax substance for moisture resistance which can easily be dissolved by some solutions. so befor e cleaning, special care should be taken to test the component ? s vulnerability to the solutions used. when u sing water-soluble ?ux please clean the pcb with puri?ed water suf?ciently and dry thoroughly at the end of the process. insuf?cient washing or drying could lower the r e liability of the capacitors. 6. p ost-cleaning-process pr ecautions application of re sin molding, etc. to the pcb and components. 1. p lease contact your local taiyo yuden sales of?ce before performing resin coating or molding on mounted capacitors. please verify on the actual application that the coating pr o cess will not adversely af fect the component quality. te chnical consider - ations 1-1. t he thermal expansion and coef?cient of contraction of the molded resin are not necessarily matched with those of the capacitor. the capacitors may be exposed to s tresses due to thermal expansion and contraction during and after hardening. this may lower the speci?ed characteristics and insulation resistance or cause r e duced withstanding voltage by cracking the ceramic or separating the coated resin from the ceramics. 1-2. w ith some types of mold resins, the resin's decomposition gas or reaction gas may remain inside the resin during the hardening period or while left under normal conditions, causing a deterioration of the capacitor's performance. 1-3. s ome mold resins may have poor moisture proo?ng properties. please verify the contents of the resins before they are applied. 1-4. p lease contact taiyo yuden before using if the hardening process temperature of the mold resins is higher than the operating temperature of the capacitors. 7. h andling pr ecautions mechanical considerations 1. be careful not to subject the capacitors to excessive mechanical shocks. withstanding voltage failure may result. 2. i f ceramic capacitors are dropped onto the ?oor or a hard surface they should not be used. t e chnical consider - ations 1. b ecause the capacitor is made of ceramic, mechanical shocks applied to the board may damage or crack the capacitors. 2. c eramic capacitors which are dropped onto the ?oor or a hard surface may develop defects and have a higher risk of failure over time. 8. storage conditions pr e cautions storage 1. to maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control temperature and humidity in t he storage area. humidity should especially be kept as low as possible. recommended conditions: ambient temperature below 40 ? humidity below 70% rh. pro ducts should be used within 6 months after delivery. after the above period, the solderability should be checked before using the capacitors. 2. c apacitors should not be kept in an environment ?lled with decomposition gases such as sulfurous hydrogen, sulfurous acid, chlorine, ammonia, etc. 3. c apacitors should not be kept in a location where they may be exposed to moisture, condensation or direct sunlight. t e chnical consider - ations 1. u nder high temperature/high humidity conditions, the decrease in solderability due to the oxidation of terminal electrodes and deterioration of taping and packaging characteristics may be accelerated.

▲Up To Search▲

Price & Availability of UP025SL120J-B-BZ

	To Download UP025SL120J-B-BZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .